# Engineer Interview Questions in Ireland

Engineers are responsible for designing and building products. In an interview context, expect to be quizzed about your technical skills and also to have your ability to work as a part of a team to get things built evaluated. The specific questions you are asked will depend on what type of engineering position you are looking for such as a specific engineering discipline like software engineer, electrical engineer or mechanical engineer.

## Top Engineer Interview Questions & How to Answer

Here are three top engineer interview questions and tips on how to answer them:

### Question No. 1: What is the most challenging engineering project you've dealt with and how did you ensure its success?

How to answer: This question requires you to give a specific example. Ideally, you are able to choose a project that mirrors the type of work you would do in the role you are interviewing for. Even if it is not your most challenging project, make sure you describe your obstacle(s) and the successful outcome clearly and enthusiastically.

### Question No. 2: In your current role, what steps do you take to avoid making mistakes?

How to answer: Whether you have a formal process or not, list any specific measures you employ (i.e. digital tools, consulting with colleagues, etc.). Make sure your answer demonstrates a commitment to quality control, efficiency and safety.

### Question No. 3: Describe a time when you dealt with a difficult client or stakeholder.

How to answer: This one also requires a specific example that demonstrates patience and good judgment. An employer is looking for evidence that you are able to confidently and calmly stand by your decisions. Share an example with a positive outcome.

### If given four projects of equal importance with the same due date, what would you do. Be specific

251 Answers↳

just some more info while we all wait(i know this process is painful- ive been through it a few times without good luck, unfortunately) June 13th is the tentative start date for ALL examiners for this round of hiring so that should tell you a lot. i just heard this today and apparently the Supervisors are apparently suppose to turn in their lists by tomorrow so calls/emails obviously follow after that is done. We might hear something later since the start date would be further down the road. i'll keep updating if i find out more or hear back from them. btw, the chemicals and computers i think hear back first and the electrical and mechanicals may hear back later as their interviews were conducted in that order. Less

↳

I applied for EE position and just received notification that I have been selected. Last name starts with "C" and interviewed on April 13th. It seems that the selections for EE and Comp Science will begin to be sent today. It may take until Friday for HR to finish sending all decisions to the applicants. Best of luck to everyone and very grateful to all who have contributed to this posting. Less

↳

I interviewed on 4/13 for a BME position and received notification on 5/2 that I was selected. In a follow up email for the Declaration of Federal Employment form, they indicated a tentative start date of 6/13. Hope this info is helpful for those still waiting - good luck! Less

### How do you think you would respond if, initially, you worked hard on a task and yet your superiors repeatedly asked you to redo and rewrite, would you be frustrated by this?

83 Answers↳

On the same boat. I haven't heard back from Dallas neither. Did your status on USAjobs change with your tentative offer? Less

↳

I neither declined nor accepted the offer, as I have not heard back from USPTO. Hope to go back into the review and change that setting on the post. I understand the 10 week cycle and the expectation of getting back to candidates within two weeks, but I was specifically told otherwise for this round. And I would accept this job if I'm selected. Less

↳

Congrats on the interview. I had an interview on 12/7 too, for ChemEng in Alexandria. SPE I spoke with had said that I would hear back in two weeks; not sure if it's different depending on the job announcement/TC you applied to. Anyone else interview this week in Alexandria? Less

### A penguin walks through that door right now wearing a sombrero. What does he say and why is he here?

81 Answers↳

The penguin says "Stop asking stupid interview questions"

↳

He's a Linux consultant (either Mexican or returning from a Mexican vacation) and is going to ask for directions and access to the server rooms so he can get to work. Less

↳

Complaining about global warming.?!

### Out of 25 horses, pick the fastest 3 horses. In each race, only 5 horses can run at the same time. What is the minimum number of races required?

73 Answers↳

Seems to me the correct answer is five. Assuming that each horse's performance is timed, by running five races with five horses each, you'll know the speed of all 25 horses. The three with the shortest times are the three fastest horses. Most responses assume you need multiple rounds, but these responses seem to assume that the five horses that finish first in the first round are the fastest five overall. That may not be the case. Just because a horse beat its four competitors doesn't mean it's one of the five fastest overall ... just that it was faster than the four it competed against. Less

↳

7 races. We run five races with five horses. The five winners race in a sixth race while the 4th and fith place finishers are eliminated from further consideration. The sixth race show horse is faster than all the horses that participated in the preliminary races where the 4th and 5th place horses participated and they are eliminated from further consideration. The other horses in the preliminary race where the 6th race show horse participated are also eliminated. The show horse in the preliminary race where the 6th race place horse participated is eliminated since there are at least three remaining horses that are faster. We are left with 6 horses. We know the winner of the 6th race is fastest overall, so that leaves five horses to enter a 7th race for the overall place and show. Less

↳

12 RACES ARE REQUIRED -------------------------------------- In the worst case scenario the 'best three' can be from a single team of 5 horses. So 5 races in round one. Chose all the first three of each of the 5 races. 3 races of all the 15 horses which were the 3 winners of the first round. Chose the 9 horses which were winners in round two and have 2 races for the 9 winners[ 5 & 4 horses] you get 6 winners. 1 race of 5 horses, out of the 6 round three winners, keeping one standby 1 race of 4 horses of round four winners with the standby. This will give you the best 3 horses out of 25 So you need to have 5+3+2+1+1 = 12 races in order to get the best three horses. Answer 12 races required. Sometimes the 2nd and/or 3rd best athlete do not get selected if they are teamed in a race along with the best athlete. Less

### How many people flew out of Chicago last year?

68 Answers↳

Actually the answer is zero. Plans fly, people don't.

↳

Roughly as many who flew into Chicago.

↳

My estimate off the top of my head is 30 planes/hr x 24 hr/day x 365 days/yr x 180 people/plane (avg) = 47M and change. Actual for 2014, Domestic and International, is 70M. This is Passenger Volume so # leaving is 35M. Less

### A frog is at the bottom of a 30 meter well. Each day he summons enough energy for one 3 meter leap up the well. Exhausted, he then hangs there for the rest of the day. At night, while he is asleep, he slips 2 meters backwards. How many days does it take him to escape from the well?

66 Answers↳

Never....the frog would be dead by day 10 since nothing to eat or drink.

↳

Assuming it doesn't die of starvation, the answer is 28 days.* start of day 1 (0 days elapsed): 0m --> 3m (then falls back 2m by start of day 2) start of day 2 (1 day elapsed): 1m --> 4m start of day 3 (2 days elapsed): 2m --> 5m ... start of day 28 (27 days elapsed): 27m --> 30m start of day 29 (28 days elapsed): 28m --> 31m In other words, 28 days will have elapsed before the frog can jump to a height exceeding 30m.* * This answer assumes the frog is not able to walk away after it hits 30m. I would assume it has no energy left to climb out based on the problem description. If the questioner disagrees with this assumption, then the answer is 27 days. Less

↳

I agree -- it's 28...because on that morning, he'll be at 27 metres and he can jump to the top in one bound. Less

### Calculate the angle of two clock pointers when time is 11:50.

61 Answers↳

30+25=55 angle between them...

↳

You know that there is 30 degrees between each number on the clock because 360/12 = 30. You know that the minute hand is at exactly 10, while you know that the hour hand is 5/6th of the way to the 12 (from the 11) because 50/60 = 5/6. Therefore to get the total angle, you must add the 30 degrees from the 10 to 11 plus the 5/6 distance from 11 to 12, and you get 30 degrees + (5/6 * 30) = 30 + 25 = 55 degrees. So the final answer is 55 degrees. Less

↳

Anonymous is on the right track with the hour hand going 0.5 degree/minute, but at 11:50 the hour hand is no longer near the 11, it's near the 12. 10 minutes before 12, it is 5 degrees from the 12. The minute hand is 60 degrees from the 12 in the same direction (360 deg=60 minutes, so 60 deg=10 minutes). Angle between the hands is the difference between these two: 60-5 = 55. Less

### You have 2 pieces of rope, each of which burns from one end to the other in 30 minutes (no matter which end is lit). If different pieces touch, the flame will transfer from one to the other. You cannot assume any rope properties that were not stated. Given only 1 match, can you time 45 minutes?

48 Answers↳

Make a T. Simple

↳

Take one rope (Rope A), place it down as a circle. Light match and start burning rope A at the tips that are touching. When the rope completely burns out, 15 minutes will have passed (since both ends are burning and being consumed at once). Hold the second rope (Rope B) straight and place one end so that it will immediately catch fire when the two burning points from (Rope A) finally touch and are just about to burn out. Thus 15 minutes on Rope A + 30 minutes on Rope B gives you 45 mins. Less

↳

** You cannot assume any rope properties that were not stated Burn like this *-------- ===> After 30mins, Rope A finished burning, and both ends of Rope B start burning Less

### There are three boxes, one contains only apples, one contains only oranges, and one contains both apples and oranges. The boxes have been incorrectly labeled such that no label identifies the actual contents of the box it labels. Opening just one box, and without looking in the box, you take out one piece of fruit. By looking at the fruit, how can you immediately label all of the boxes correctly?

49 Answers↳

Swaz answer is almost correct however it does not work in all scenarios. lets assume: box 1 is labelled Oranges (O) box 2 is labelled Apples (A) box 3 is labelled Apples and Oranges (A+O) and that ALL THREE BOXES ARE LABELLED INCORRECTLY" Pick a fruit from box 1, 1) if you pick an Orange: - box 1's real label can only be O or A+O - box 1's current label is O - since ALL LABELS ARE INCORRECT then box 1's real label can not be O - box 1's new label should then be A+O by elimination - since ALL LABELS ARE INCORRECT - box 2's label is changed to O - box 3's label is changed to A - SOLVED 2) if you pick an Apple: - box 1's real label can only be A or A+O - box 1's current label is O - since ALL LABELS ARE INCORRECT then box 1's real label can not be O - this still leaves us with the choice between label A and label A+O - which would both be correct - FAILURE Solution: The trick is to actually pick a fruit from the A+O labeled box Pick a fruit from box 3: 1) if you pick an Orange: - box 3's real label can only be O or A - box 3's current label is A+O - since ALL LABELS ARE INCORRECT then box 3's real label can not be A+O - box 3's new label should then be O by elimination - since ALL LABELS ARE INCORRECT - box 1's label is changed to A - box 2's label is changed to A+O - SOLVED 2) if you pick an Apple: - box 3's real label can only be O or A - box 3's current label is A+O - since ALL LABELS ARE INCORRECT then box 3's real label can not be A+O - box 3's new label should then be A by elimination (not O) - since ALL LABELS ARE INCORRECT - box 1's label is changed to A+O - box 2's label is changed to O - SOLVED Less

↳

It's easier to draw it out. There are only 2 possible combinations when all labels are tagged incorrectly. All you need to do is pick one fruit from the one marked "Apples + Oranges". If it's Apple, then change "Apple + Orange" to "Apple" The "Apple" one change to "Orange" The "Orange one change to "Apple + Orange" If it's Orange, then change "Apple + Orange" to "Orange" The "Apple" one change to "Apple + Orange" The "Orange" one change to ""Apple" Less

↳

All the three boxes are names incorrectly. SO the bax lebeled Apples+Oranges contains only Oranges or Only Apples. Pick one fruit from it. If it is Orange then lebel the box as Orange. So the box lebeled Oranges contains Apples and the remaining contains both. Less

### Suppose you had eight identical balls. One of them is slightly heavier and you are given a balance scale . What's the fewest number of times you have to use the scale to find the heavier ball?

48 Answers↳

Two. Split into three groups of three, three, and two. weigh the two groups of three against each other. If equal, weigh the group of two to find the heavier. If one group of three is heavier pick two of the three and compare them to find the heaviest. Less

↳

2 3a+3b+2 = 8 if wt(3a)==wt(3b) then compare the remaining 2 to find the heaviest if wt(3a) !== wt(3b) then ignore group of 2 discard lighter group of 3 divide the remaining group of 3 into 2+1 weigh those 2 If == the remaing 1 is the heaviest if !== the heaviest will be on the scale Less

↳

2 weighings to find the slightly heavier ball. Step 1. compare 2 groups of three balls. Case 1. if they are both equal in weight, compare the last 2 balls - one will be heavier. case 2. If either group of 3 balls is heavier, take 2 balls from the heavier side. compare 1 ball against the 2nd from the heavy group result 1. if one ball is heavier than the other, you have found the slightly heavier ball. result 2. if both balls are equal weight, the 3rd ball is the slightly heavier ball. Easy Shmeezi Less