Instrument control technician Interview Questions

4

Instrument Control Technician interview questions shared by candidates

Top Interview Questions

Sort: Relevance|Popular|Date
Constellation
Instrument & Control Technician was asked...2 December 2011

if you have a pump in a run of piping a dp pressure readouts coming off the piping, one 3 floors above, one in line with the pump, and one 3 levels below, which is most accurate? Will the one above read higher, lower, or the same? What about the one below?

2 Answers

you have to understand and apply Bernoulli in the context of reading flow. what are you reading? static pressure? velocity pressure? the readings can be accurate at any point, but you have to adjust using textbook formulas for the changes that occur in flow both downstream and upstream of the pipe. for example, you have to either add or subtract friction loss and head loss depending on where the reading is. If you calibrate readings for such changes, then you can get accurate readings in any location. Less

most accurate: the one in line one above: lower because you are using the pump head to get the water to the detector and gravity is working against you. one below: higher because the weight of the water on top of the detector. Less

Constellation

why would we use a current loop in our equipment instead of a voltage loop?

1 Answers

the cabling covers long distances, the voltage would be too affected by interference. Less

Kent

How do I approach a job

1 Answers

I usually take an analytical approach and dont rush, however I go through what process I need to mobilize for the job with regards to documentation and tools needed. Less

Arizona Public Service Company

Why should be hire you above the other applicants? How do you correct someone that has been doing their job for 25 years, but it cutting corners?

Viewing 1 - 4 of 4 Interview Questions